Crossfit Lillington – Mayhem Affiliate – Bodybuilding
Functional Pump (Push & Pull) (Checkmark)
INSTRUCTIONS! Do NOT do this session with the rest of the bodybuilding track. It should be done alone for the day. We recommend doing it as the ONLY workout for that day and the next day (i.e. if you do the 3 functional pumps during the week, we don’t recommend doing any other workout apart from the 3 power lifts – Squat, Deadlift & Press). Please click on “Workout prep notes available” directly to read the instructions before doing the workout!
Week 3 of 10:
Max Rep Bench Press @50-60% at 50-60% of 1RM (+2.5-15lbs from last week), based on the chart in workout prep notes
-rest 1:00-
Burn Out Set: Max Reps @50% of the weight performed above
*Click “Workout prep notes available” for full explanation of Bench Press Cycle
-then-
6 sets
8 Supinated Dumbbell Bent Over Rows at RPE 8
10 Incline Dumbbell Chest Flies at RPE 8
12 Strict Pull Ups (use a band if needed to get in 2 sets or less)
-rest 1-2 minutes b/t sets-
30 MINUTES VERSION (or less):
*For a shorter version today, cut the sets down to 4 total
Athletes Notes
How to approach the lifts
Safety and Form
Always have a spotter!
Control the weight, we don’t to see the bar pop in the air.
Make sure athletes focus on a deep stomach breath before every lift.
Grip should be a thumb length outside the chest. Shoulders stay pressed back against the bench while feet stay in contact with the floor.
Ensure athletes look at the clock after their Max and rest “exactly” 1:00 before performing their “Burn Out Set.”
Cycle explanation
During this 10 week strength cycle, we will be following a max-rep bench press program designed to build upper body strength, muscle hypertrophy, and pressing endurance. You will perform max unbroken reps at a progressively increasing load each week, promoting both physical and mental fortitude under the barbell. Once you complete the max lift, rest 1:00, drop the weight by 50%, and then complete a “burn out set” of max unbroken reps.
Start at the weight listed below for week 1 and progress weekly based on the listed increase for your 1RM.
In Pounds:
1RM………….Increase
<= 120#…….start at 60% and increase by 2.5 pounds every other week (or 2.5 every week)
125-185#…..start at 50% and increase by 5 pounds every week
190-255#…..start at 60% and increase by 5 pounds every week
260-360#…..start at 50% and increase by 10 pounds every week
= 365#……..start at 50% and increase by 15 pounds every week
In Kilos:
1RM…………..Increase
<= 55kg……..start at 60% and increase by 2.5kg every other week
55-85kg……..start at 50% and increase by 2.5kg every week
85-115kg……start at 60% and increase by 2.5kg every week
115-165kg….start at 50% and increase by 5kg every week
= 165kg…….start at 50% and increase by 7.5kg every week
Example Sets
Set 1:
Max Rep Bench Press @150# (70kg)
-rest 1:00-
Set 2:
Burn Out Set (Max Reps) @75# (35kg)
Based off of a 300# 1RM (135kg)
Demo Videos
Bench Press
Double Dumbbell Supinated Bent Over Rows
Incline Dumbbell Chest Fly
Strict Pull Up
—
INSTRUCTIONS
These are intended to give you a great “pump” for the day. They are a mix of bodybuilding type movements, some CrossFit style structure and/or movements, and aerobic work.
The intensity is designed to just be MODERATE! It is so you can come and do a workout to get a “pump”, sweat some and get out of breath. Ideally you can hit these with friends as well!
Many of these are from, or built off of, recent workouts Rich has done. You can come and do them on a day when you aren’t feeling like doing as much intensity with our other more CrossFit based tracks, or when you want to change up your bodybuilding style. Have fun with them!
Do NOT perform this with the rest of the bodybuilding track. It is meant to be done alone for the day. We recommend performing these as the ONLY bodybuilding for this day and the following day (i.e. if you do all 3 functional pumps in a week, we don’t recommend doing any other bodybuilding, except for the 3 power lifts – Squat, Deadlift & Press).
See Scaling and Sub Document HERE for calorie conversion chart and recommended substitution options!
Current Bodybuilding Cycle: Week 5 of 15 (No Measure)
Bodybuilding Cycle 2
Goal: The goals are to stay focused and rest just long enough so that you can perform the next set with quality and control unless stated otherwise.
Keep your attention on each set and keep your phone in your bag. Sessions are not done “for time” but treat them like you are limited on time. Keep a visible clock running to keep you accountable.
Progression: The main lifts will follow a 4 week cycle that will have a deload after each for 3 full cycles. The main lifts will follow more closely with a percentage than an RPE. Starting out the cycle we will utilize a classic 5x56to set the weight athletes will use the rest of the cycle. The goal is to increase capacity with moving a heavy percentage for each individual athlete. Athletes should trust the process and stay as close to the percentages as they can. This cycle will get heavy and stay heavy throughout. If you need a break, take one and go lighter or just move. There will be a test week and deload weeks throughout this cycle that will take us into the end of August.
Length: This cycle will be a 17 week long cycle starting with a familiarization week and move straight into the heavy lifts. This cycle will test each athlete.
Mayhem Bodybuilding Goals
Mayhem Bodybuilding is a stand alone hypertrophy focused program. You may layer this on top of some of the other Mayhem Athlete Program, but it is not designed to be performed on top of all other tracks each day. We will include pieces of some days in other programs as “ACCESSORY”
The goals are to stay focused and rest just long enough so that you can perform the next set with quality and control unless stated otherwise.
Keep your attention of each set and keep your phone in your bag. Sessions are not done “for time”
but treat them like you are limited on time. Keep a visible clock running to keep you accountable.
Bodybuilding RPE Scale
RPE 1-3 || This should be a weight that an athlete can move with ease throughout the intended rep range.
RPE 4-5 || This is a weight that provides a moderate amount of resistance but the athlete feels like they could double the intended rep range with the weight they chose
RPE 6-7 || This is a moderate-moderate/heavy weight for the athletes. This should provide a challenge for the intended rep range but should not be something that they are worried of failing. The rest needed between sets should be minimal.
RPE 8-9 || This is a near maximal effort for the intended rep range. Athletes should need and want adequate amount of rest between the sets at this RPE.
RPE 10 || This is a max effort for the intended rep range. The athlete should be fully taxed at the end of each set.
Upper Body Anterior Warm Up (Checkmark)
Crossover Symmetry Warm-up
-into-
3 rounds
10 Perfect Pushups (controlled form)
15 Band Pull Aparts
5 PVC Around the Worlds (each way)
10 Wall Angels
5 Scorpions (each side)
Athletes Notes
Focus: Effort should be easy building into moderate. Get yourself moving and opened up for upcoming work.
Crossover Symmetry
OR if you don’t have access perform as Banded 7s – 7 each rep
Perfect Push ups
Banded Pull Aparts
PVC Around the Worlds
Wall Angels
Scorpion Stretch
Bench Press
*Rest 2:00-2:30 b/t sets
Focus: Control should be shown with each rep on the way down and on the way up. Bar should be lowered to just below the sternum. Keep elbows at a 45 degree angle to the body and avoid flaring out. Shoulders should be loaded back against the bench throughout reps.
4 sets: 10 reps – RPE 6
*Rest 2:00-2:30 b/t sets
Alt. DB Tempo Incline Bench + Double DB Incline Bench
*Rest 1:00-1:30 b/t sets
*Build to a moderate weight and stay the same or build across all sets.
Focus: Incline of bench should be around a 45-60 degree incline. Start with both DBs extended overhead. Bench with one arm, leaving the other arm extended overhead and then repeat with other side. Tempo for this movement is 2 sec negative + 1 sec pause in bottom + explosive press up. No tempo on double reps. Go directly into double DB reps after alternating reps have been completed. Loading should be moderate and allow for control throughout entire rep. Select a weight that you can control when sitting back to start and sitting up to finishing set. Do not drop the dumbbells. To avoid injury, bring the knees up to meet the dumbbells and sit up with them. If you have to drop them to deload, you’ve gone too heavy.
3 sets: 12 reps (R+L for 12 each side then both for 12) – RPE 7
*Rest 1:00-1:30 b/t sets
Hex Press
*Rest 1:00-1:30 b/t sets
Focus: Sitting back on a flat bench with a dumbbell in each hand, assume a neutral grip position and press the dumbbells to the ceiling and together. Perform a DB bench while maintain a neutral grip and dumbbells pushed together throughout the pressing motion.
3 sets: 15 reps – RPE 7
*Rest 1:00-1:30 b/t sets
Flat Bench DB Chest Fly
*Rest 1:00-1:30 b/t sets
*Build to a light/moderate weight. Stay the same and focus on strict control throughout
Focus: Lying on a bench, extend two dumbbells towards the ceiling. Keeping a slight bend in the elbows, lower the dumbbells out to the sides. Dumbbells should be kept in line with the sternum or slightly lower. Shoulders should be loaded back against the bench through the entire movement. Refrain from going deeper than the level of the bench at end range. Movement can also be performed while lying on the floor.
3 sets: 15 reps – RPE 7
*Rest 1:00-1:30 b/t sets
Single DB Double Head Curl
*Rest 1:00-1:30 b/t sets Focus: Take one dumbbell and turn it sideways. Grasp the single dumbbell by each head and lean slightly forward while standing. Curl the dumbbell with both hands simultaneously.
3 sets: 15 reps – RPE 7
*Rest 1:00-1:30 b/t sets
Standing Alternating DB Hammer Curl
*Rest 1:00-1:30 b/t sets
Focus: In a standing position, take a KB and grasp it between both hands around the bell portion (not the handles). Palms will be facing each other on either side of the bell. Lift the KB overhead, being mindful of the positioning of the handles so they don’t hit the head. Keeping the elbows tucked and pointed at the ceiling, lower the weight behind the head. Extend back overhead to complete. Be sure to keep core engaged and avoid overextension in the low back.
3 sets: 15 reps (each side) – RPE 7
*Rest 1:00-1:30 b/t sets
Cooldown/Mobility (No Measure)
1 min pec stretch against door/rig
1 min lacrosse ball pec smash (each side)
1 min overhead elbow grab tricep stretch (each side)
1 min bicep wall stretch (each side)
Athletes Notes
Pec Stretch against door or rig
Standing Lacrosse Ball Pec Smash or Lying Lacrosse Ball Pec Smash
Overhead Elbow Grab Tricep Stretch
Bicep Wall Stretch
Mayhem Mini Pump
Mini-Pump Sessions are used as a supplement to another Mayhem Athlete track or on days when you are pressed for time and cannot complete the full day’s bodybuilding session as programmed. You should NOT complete today’s bodybuilding program AND the mini-pump session. Choose one or the other.
Upper Body Anterior (4 Rounds for time)
4 Rounds
10 Barbell Bench Press @ moderate weight – maintain quality RPE 7
10 Alt. DB Incline Bench + Double DB Incline Bench (each side and both) @ Moderate weight – maintain control and quality RPE 7
10 Flat Bench DB Chest Fly @ moderate weight – maintain quality RPE 7
15 Single DB Double Head Curl @ moderate weight – maintain quality RPE 7
-Rest 3 min b/t rounds-
Athletes Notes
Alternating DB Incline Bench + Double DB Incline Bench
Flat Bench DB Chest Fly
Single DB Double Head Curl